3D printingFDM and resin.
From a single prototype to a run of several dozen parts, in the material that suits your use.
3D modelling
Two possible starting points: an idea with nothing on paper, or a dimensioned drawing. Either way, you leave with a file ready to print.
From a technical drawing
Send us your 2D drawings or dimensioned sketches, and we take care of modelling the part accurately in 3D.
Custom design
We turn your idea, even a rough sketch, into an optimised 3D model, and refine the design with you to make sure it can be made.
Collaborative review
Every stage is approved by you. You receive renders to check that the model matches what you expect, before anything is printed.
How it works
- 1
Brief
You describe the part, what it is for and the constraints it has to meet.
- 2
Modelling
We build the model, from scratch or from your dimensioned drawing.
- 3
Review
Renders and revisions until the model is what you had in mind.
- 4
Delivery
An optimised file, ready for printing or for production.
Every project has its own quote
The price depends on how complex the geometry is and on the starting point. Describe the part and we come back to you within 24 working hours.
FDM & resin printing
Send your file, choose the material, we print. From a one-off part to a run of several dozen, in FDM as well as resin.
On-demand printing
Simply send us your file as STL, OBJ or STEP, choose the material, and we start printing.
Expert advice on materials
We guide you to the right material (PLA, PETG, ABS, ASA, TPU, resin) based on the strength, flexibility, finish and budget you are aiming for.
Finishing and post-processing
Beyond printing: sanding, assembly and preparation for painting, so the part arrives finished.
Large-format printing
Up to 350 x 350 x 350 mm in a single session, for large parts as well as batched short runs.
How it works
- 1
Send the file
Through the quote form, with the constraints the part has to meet.
- 2
Choose the material
We point you to the right one for the strength and finish you expect.
- 3
Printing
FDM or resin, as a single part or as a short run.
- 4
Finishing
Cleaning, support removal, sanding or assembly where needed.
Every project has its own quote
Every project is different: dimensions, material, quantity and finish set the price. Send your files — the quote is free and detailed.
End-to-end support
One point of contact from the first conversation to the delivered part. We handle the design, the material choice, the production and the finishing.
A single point of contact
No back and forth between a design office and a printer: the same team carries the project from end to end.
Material advice included
Choosing the material and the technology is part of the service, not a decision left to you alone.
Quality control
Parts are checked before they ship, and reprinted if the result does not match what was approved.
Finishing and packaging
Post-processing, assembly and bespoke packaging when the project calls for it, as with the CAPTAS-4 kit.
How it works
- 1
Design and modelling
Your idea, sketch, drawing or existing part becomes a precise 3D model, refined with you.
- 2
Advice and optimisation
We weigh up material and technology against your technical, visual and budget constraints.
- 3
Printing and finishing
Production once you have approved, then quality control and post-processing.
- 4
Delivery
A part ready to use, packaged for how it will be handled.
Every project has its own quote
End-to-end support is priced on the project as a whole. Tell us where you are, and we will scope the next steps together.